Protective cabinets for small and medium format thermal printers CIT

General characteristics :

• The body of the cabinet is a single, thermoplastic form, meaning the upper and side panels are a single unit;
• The panels are made of a through-stained,10 mm thick composite material, protecting the cabinet and making it watertight;
• Smooth outer surface, without angles to facilitate cleaning and avoid the accumulation of waste.

SPECIFIC FEATURES OF CIT STANDARD & CIT C :

• Two hinges enable the top panel of the cabinet to tilt forward to access the printer mechanics and enable label insertion;
• The pivoting top panel rests on the lip seals of the cabinet base;
• Connectivity: two standard 7 to 13 mm cable glands (on the base) to allow cables to enter the cabinet;
• Printer elevation skids to pull it forwards out of the cabinet.

Front panel :

• Printer controls and labels accessed via the front panel using a 6 mm-thick raisable flap made of PMMA (transparent thermoplastic);
• The raisable flap is closed tightly against the leaktight seals with a latch.

SPECIFIC FEATURES OF CIT L & CIT GM :

• Sliding shelf fitted to triple extending rails in stainless steel, capable of handling loads of up to 60 kg, allowing the printer to be removed fully;
• Connectivity : two standard cable glands (7 to 13 mm) to allow cables to enter the cabinet.

Front panel :

• Printer controls and labels accessed via the front panel using a 6 mm-thick raisable flap made of PMMA (transparent thermoplastic);
• The raisable flap is closed tightly against the leak tight seals with a latch.